13/8 SIYASA 13/16 13/8 13/10

Diamita na layin samfur: 0.68mm

Kaurin jikin ƙusa: 0.53mm

Nisa na ƙusa: 0.75mm

Maganin saman: Galvanized&aplypaint

Lambar jere: 100pcs

Lambar akwatin: 5000pcs Tsawon samfur: 3mm 4mm 6mm 8mm 10mm 12mm 14mm 16mm

Raba

TUNTUBE YANZU DOWN LOAD TO PDF

Cikakkun bayanai

Tags

KYAUTA AMFANI

Masana'antar kayan marmari, gado mai matasai, sirdin mota, kayan lantarki

fata takalma, katako casebinding, da daban-daban na katako kayayyakin.

KYAUTA APPLICATION

Gabatar da jerin 13/8 ta Code Kusoshi - mafita ga duk bukatun ku na gyarawa. Wannan jerin yana ba da nau'ikan kusoshi masu yawa waɗanda suka dace da nau'ikan aikace-aikace iri-iri, suna sanya su zama kayan aiki mai mahimmanci don masana'anta kayan aiki, kayan aikin kayan kwalliya, kayan lantarki, takalma na fata, katako na katako, da sauran samfuran katako daban-daban.

Tare da diamita na layin samfur na 0.68mm, kusoshi a cikin jerin 13/8 suna ba da ƙarfi na musamman da kwanciyar hankali. Kaurin jikin ƙusa na 0.53mm yana tabbatar da dorewa, yayin da faɗin jikin ƙusa na 0.75mm yana ba da ingantaccen riko. An gina waɗannan kusoshi don tsayayya da amfani mai nauyi kuma suna ba da sakamako mai dorewa.

Don haɓaka juriya ga lalata da kuma tabbatar da dorewa har ma a cikin wuraren da ake buƙata, ƙusoshin suna yin galvanized da fenti saman jiyya. Wannan magani ba kawai yana kare ƙusoshi ba amma yana ba su bayyanar da kyau.

Jerin 13/8 yana dacewa a cikin layuka na 100pcs, tare da kowane akwati dauke da 5000pcs, yana tabbatar da cewa kuna da wadataccen wadataccen abinci ga duk ayyukan ku. Tsawon samfurin ya fito daga 3mm zuwa 16mm, yana ba da damar sassauci a cikin buƙatun gyara daban-daban. Ko kuna buƙatar tabbatar da ƙananan kayan aikin katako ko haɗa manyan kayan daki, waɗannan kusoshi suna ba da cikakkiyar mafita.

Ga masu kera kayan daki, jerin 13/8 suna ba da tallafi na musamman wajen gina ƙaƙƙarfan ƙaƙƙarfan abin dogaro. Daga hada sofas zuwa gyara kayan kwalliya a cikin sirdi na mota, waɗannan kusoshi suna ba da ingantaccen bayani tare da madaidaicin girmansu da ƙarfi mai ƙarfi.

A cikin masana'antar lantarki, daidaito da aminci sune mafi mahimmanci. An ƙera kusoshi jerin 13/8 don samar da ingantacciyar hanyar gyarawa, tabbatar da cewa kayan aikin lantarki sun kasance da ƙarfi a wurin yayin da suke rage haɗarin lalacewa ko sassautawa.

10mm galvanised staples

3mm upholstery staples

4mm staples

galvanised staple nails

Idan kuna sha'awar samfuranmu, zaku iya zaɓar barin bayanin ku anan, kuma za mu tuntube ku nan ba da jimawa ba.